|
|
제품 상세 정보:
|
| OD: | 68.5 밀리미터 | 길이: | 10 내지 40 |
|---|---|---|---|
| 재료: | 폴리프로필렌 | 흐름 속도: | 1.2m3/h |
| MOQ: | 1개 부분 | 여과기 지역: | 0.8-1.6 ㎡ |
| 엔드캡 방식: | 226/222/Fin | ||
| 강조하다: | 69mm pleated water filter cartridge,FDA 5 micron pleated water filter,69mm pp pleated filter cartridge |
||
General Description
PP filter cartridge is constructed of micro pore polypropylene membrane media.
The material of cage, core and end cap are polypropylene.
Adaptors are welded with cartridges without using glue.
PLZ Series Polypropylene(PP) pleated filter cartridge is made of the high accuracy PP membrane, with widely chemical compatibility, extremely low dissolved matter, and can be used in various filter situation.
Material structure
| Filter medium | Polypropylene (PP) |
| Support/Drainage | Polypropylene (PP) |
| Core/Cage/End Cap | Polypropylene (PP) |
| O-ring & gaskets seals | NBR, Silicone, EPDM, Viton |
Specifications
| Item | Technical Parameters |
| Micron | 0.1um, 0.22um, 0.45um, 1um, 2um, 3um, 5um, 10um, 20um, 30um, 60um |
| Filtration area | 0.6-0.7m² |
| Outside diameter | 2.7" (69mm) |
| Max. operating differential pressure | ΔP≤0.35MPa at25℃ |
| Max. operating differential pressure (reverse direction) | ΔP≤0.28MPa at60℃ |
| Max. operating temperature | 80℃(Stainless steel support is recommended for temperature exceeds 50℃) |
| Sterilization temperature | 30 minute cycles @121℃ |
| Flow rate | 1.2m³/h |
Performance
| Max. operating temperature | 80℃ |
| Max. operating pressure | 4bar/21℃ |
| 2.4bar/80℃ | |
| Mosit-heat sterilization | 121℃/30min |
| Hot water sterilization | 85℃/30min |
담당자: Lucy
전화 번호: 86-21-57718597
팩스: 86-021-57711314
Korean
전체 평점
등급 스냅샷
다음은 모든 평점의 분포입니다.모든 리뷰